Price range: $2,190.00 through $6,490.00
Starting at:
✅ Equipment only →Just add to cart.
No guesswork. Get your exact installation cost today.
The Moov Inverter Pool Heat Pump represents the pinnacle of aquatic climate control, delivering up to 50% higher energy savings compared to traditional on/off units. Featuring advanced Twin-Rotary DC inverter technology and an enlarged spiral titanium heat exchanger, it intelligently modulates heating capacity from 20% to 100% for rapid temperature climbs and whisper-quiet maintenance. Maximize your swimming season with an industry-leading Coefficient of Performance (COP) of up to 10.6, engineered to handle the variable demands of the Canadian climate.
When it comes to a premium pool heater replacement, securing a highly efficient system is only half the equation; the execution of the install dictates its lifespan and operational safety. The Moov Inverter offers outputs ranging from 50,000 BTU to 140,000 BTU, making it highly adaptable, but it requires precise electrical integration and spatial planning to achieve its staggering thermal efficiencies. As your trusted Moov Inverter certified installer, 4Most Energy ensures that every high-voltage electrical connection, dedicated 208-230V circuit, and structural bonding strictly adheres to Electrical Safety Authority (ESA) and local building standards.
Unlike uncertified contractors or standard big-box retail purchases that leave you liable for safety hazards and voided warranties, our licensed technicians guarantee a code-compliant installation built for long-term reliability and complete peace of mind. We calculate precise water flow dynamics—accommodating up to 167 L/min—and secure mandatory operational clearances (minimum 20 inches circumferentially and 8 feet vertical clearance for air discharge) to prevent equipment-killing air recirculation. Whether you are building a new backyard oasis or replacing an outdated, energy-draining unit, trust 4Most Energy for your Moov Inverter pool heat pump installation Southern Ontario. We seamlessly tie this into your broader home comfort ecosystem, bringing the same rigorous standards we apply to our high-efficiency HVAC upgrades and new boiler installation services, ensuring your entire property operates flawlessly.
Manufacturer Warranty: 3-Year Parts & Labor | 5-Year Compressor & Titanium Heat Exchanger (Parts).
| Model | Max Pool Volume (Gallons) |
Heating Capacity (BTU) |
COP Range | Power Supply | Rated Current (A) |
Breaker |
|---|---|---|---|---|---|---|
| MI500 | Up to 14,000 | 50,000 | 10.6 – 5.98 | 208-230V | 2.00 – 11.0 | 20A / 30A |
| MI650 | Up to 18,000 | 66,000 | 11.2 – 5.61 | 208-230V | 2.30 – 14.8 | 30A |
| MI900 | Up to 28,000 | 90,000 | 13.6 – 6.0 | 208-230V | 2.34 – 19.1 | 30A |
| MI1100 | Up to 32,000 | 110,000 | 13.5 – 5.8 | 208-230V | 2.65 – 25.6 | 40A |
| MI1400 | Up to 42,000 | 140,000 | 13.1 – 5.8 | 208-230V | 3.69 – 29.8 | 50A |
⚡ Performance condition: Air 80°F / Water 80°F / Humidity 80%.
Proper sizing is critical for the cold shoulder seasons in Southern Ontario.
While the MI500 is engineered for smaller pools up to 14,000 gallons, larger builds will require the MI1100 or MI1400 (handling up to 42,000 gallons).
We calculate your specific thermal load based on surface area, wind exposure, and desired temperature rise. Integrating this unit with modern variable speed pool pumps ensures the optimal required water flow (83 to 167 L/min) is maintained efficiently, maximizing the heat pump's COP without wasting electrical energy.
The Moov Inverter is backed by a robust manufacturer warranty when installed by certified professionals:
Important: To maintain the integrity of the titanium heat exchanger and keep your warranty valid, strict adherence to optimal water chemistry is required: pH 7.4-7.6, Alkalinity 80-120 ppm, and appropriate sanitation levels. Warranty exclusions apply to damage caused by improper winterization (freezing), insufficient water flow, or severe chemical imbalances.
Toronto, Markham, Richmond Hill, Vaughan, Aurora, Newmarket, Scarborough, Brampton, and Mississauga.
Extended Service Area: Stouffville, Oshawa, Barrie, Orangeville, Hamilton, St. Catharines, Guelph, Kitchener.
Yes. The Moov Inverter is specifically engineered to operate efficiently in variable climates. It can function in ambient air temperatures as low as 32°F (0°C), making it exceptional for extending your swimming season through the chilly Southern Ontario spring and fall.
Compared to traditional on/off pool heat pumps that run constantly at maximum capacity, the Moov Inverter uses intelligent modulation to maintain temperatures at lower speeds. This results in up to 50% higher energy savings and an average Coefficient of Performance (COP) of 8.0.
These units require a dedicated 208-230V/1Ph/60Hz electrical supply. Depending on the exact model (MI500 up to MI1400), a dedicated breaker ranging from 30A to 50A is required. Our certified installers ensure all wiring meets strict ESA codes.
The Moov Inverter is remarkably quiet. Operating at just 48 dB(A) at 1 meter in Silence Mode, it is up to 7 times quieter than conventional heat pumps—roughly equivalent to the hum of a standard household refrigerator.
Yes. To achieve maximum thermal transfer and prevent system errors, proper water flow is mandatory. Required flow rates range from 83 L/min for the MI500 up to 167 L/min for the larger MI1400 model. We measure and adjust this during the professional installation process.
Specific models within the Moov Inverter lineup (those with the "MIC" codification) feature an Auto Mode that provides both heating (adjustable up to 104°F) and active cooling (adjustable down to 54°F) capabilities to maintain perfect water temperatures during intense summer heatwaves.
