Excalibur Sureflo® Premium Reverse Osmosis System – Supplied & Professionally Installed by 4Most Energy
The Excalibur Sureflo® Premium Reverse Osmosis System is a high-pressure drinking-water purification system designed to provide treated water directly at a dedicated drinking-water faucet. The manufacturer describes the current system as a 7-stage, 100 GPD reverse osmosis system using membrane technology, with applications including municipal, well and lake water.
The treatment process can include sediment filtration, carbon filtration, ceramic filtration, a booster pump, a thin-film composite RO membrane, remineralization and coconut-shell carbon post-filtration, depending on the selected configuration. The supplied manual explains that the sediment stage reduces suspended material such as silt, dirt, scale and rust, while carbon filtration helps reduce chlorine and substances associated with taste and odour. The RO membrane separates dissolved minerals from the incoming feed water, with rejected material directed to drain.
The system incorporates a booster pump to increase pressure for the RO membrane process. The manufacturer documentation specifies a 24-volt booster-pump system, while the manual identifies a required 110 V / 60 Hz power supply for its booster-pump configurations.
Professional installation requires suitable access to a potable cold-water supply, household drain connection and electrical power. The installation location must remain protected from freezing temperatures and direct sunlight. The manufacturer recommends softened water where applicable because it can extend RO membrane life.
System sizing and configuration should be based on the home's water conditions and intended drinking-water demand. Feed-water requirements in the installation guide include 30–100 psi, 40–100°F, maximum 1,800 mg/L TDS, turbidity below 1.0 NTU, hardness below 170 mg/L as CaCO₃, iron below 0.1 mg/L and manganese below 0.05 mg/L.
4Most Energy can coordinate the equipment selection, plumbing connections, system commissioning and operational checks so the RO system is installed according to manufacturer requirements and applicable plumbing codes.
Why Install the Sureflo Premium RO System with 4Most Energy?
- 100 GPD rated capacity for residential drinking-water production.
- 7-stage reverse osmosis configuration on the current Premium system.
- High-pressure booster pump to support RO membrane performance.
- Thin-film composite RO membrane for dissolved-solids reduction.
- Sediment filtration for suspended material including dirt, scale and rust.
- Carbon filtration for chlorine, taste and odour reduction.
- Ceramic filtration available on the EWR 7100P configuration.
- Enalka remineralizing filter on applicable configurations.
- Coconut-shell carbon polishing filter for final taste and odour polishing.
- Lead-free designer drinking-water faucet supplied with the Premium system.
- Automatic shut-off system stops feed water when the storage tank reaches capacity.
| Specification | Manufacturer Data |
|---|---|
| Brand | Excalibur Water Systems |
| Product | Sureflo® Premium Reverse Osmosis System |
| Models | EWR 5100C / EWR 5100E / EWR 5100EA / EWR 7100P / EWR 7100PA |
| Capacity | 100 GPD |
| System Type | Reverse Osmosis |
| Stages | Up to 7 stages |
| RO Membrane | Thin-film composite, 100 GPD |
| Booster Pump | 24 V / 110 psi listed on current manufacturer product page |
| Electrical Requirement | 110 V / 60 Hz supply identified in installation manual |
| Storage Tank | Manufacturer web page: 5-gallon composite pressure tank |
| Dimensions | 25" × 6" × 18" |
| Faucet | Lead-free designer drinking-water faucet |
| Feed Water Pressure | 30–100 psi |
| Feed Water Temperature | 40–100°F |
| Maximum Feed TDS | 1,800 mg/L |
| Feed Turbidity | <1.0 NTU |
| Maximum Hardness | <170 mg/L as CaCO₃ |
| Maximum Iron | <0.1 mg/L |
| Maximum Manganese | <0.05 mg/L |
| Model | Capacity | Recommended House Size | Recommended Occupants |
|---|---|---|---|
| EWR 5100C | 100 GPD | Not specified by manufacturer | Not specified |
| EWR 5100E | 100 GPD | Not specified by manufacturer | Not specified |
| EWR 5100EA | 100 GPD | Not specified by manufacturer | Not specified |
| EWR 7100P | 100 GPD | Not specified by manufacturer | Not specified |
| EWR 7100PA | 100 GPD | Not specified by manufacturer | Not specified |
1. Request Installation Quote Contact 4Most Energy to arrange an assessment and installation quote.
2. System Sizing Consultation Review water source, water chemistry, pressure, available installation space and intended drinking-water demand.
3. Equipment Recommendation Select the appropriate Premium RO configuration based on the application and available water-quality information.
4. Installation Scheduling Arrange a suitable installation appointment.
5. Removal of Existing Equipment Where applicable, disconnect and remove the existing RO equipment and prepare the installation area.
6. Installation & System Connection Installation may include:
- RO manifold assembly
- sediment and carbon filtration
- RO membrane
- booster pump
- storage tank
- dedicated drinking-water faucet
- cold-water feed connection
- RO drain connection
- electrical connection for the booster pump
- applicable optional filtration stages
The manufacturer requires the RO system to be connected to a potable cold-water supply. The drain connection should not be connected to a dishwasher drain or located near the garbage disposal.
7. Safety & Leak Testing Check plumbing connections, tubing, feed-water supply, drain connection, electrical operation and system pressure.
8. Final Commissioning The system is sanitized, started and checked for correct operation. The manufacturer instructs installers to discard initial tank production during startup because the membrane is shipped with preservative and the system requires flushing.
Manufacturer Warranty
The current Excalibur product page specifies an unlimited 7-year warranty, excluding consumables. The supplied brochure also advertises a 7-year unlimited warranty, excluding consumables.
Consumable filters are subject to scheduled replacement. The installation manual recommends replacing the RO filters, excluding the membrane, approximately every six months, although local conditions may require more frequent replacement. The manual lists a typical RO membrane life expectancy of three to five years when a water softener is installed before the RO system.
4Most Energy Labour Warranty
4Most Energy labour-warranty terms were not provided in the supplied manufacturer documentation. Insert the current 4Most Energy labour warranty terms here before publishing.
Warranty Claim Process
- Contact 4Most Energy regarding the equipment issue.
- Provide the model and installation information.
- 4Most Energy assesses the issue and determines whether it is related to a warrantable component or installation/service issue.
- Where applicable, the manufacturer warranty process is initiated for the affected component.
- Consumable items and normal filter replacement are handled separately from the manufacturer's stated warranty coverage.
Optional Maintenance Plan
Maintenance plans starting from $12.99/month
A maintenance plan can provide scheduled RO filter service, system inspection, leak checks and performance monitoring. Enrollment terms, included service frequency and replacement-component coverage should be confirmed with 4Most Energy before publishing.
