$55.00
Starting at:
✅ Equipment only →Just add to cart.
No guesswork. Get your exact installation cost today.
Engineered for maximum energy efficiency and precise hydraulic control, the Hayward 400/600/800 Series variable speed pumps deliver high-performance water circulation for modern pools. Featuring totally enclosed fan-cooled (TEFC) motors and integrated OmniX Mobile App Bluetooth control, these units provide seamless programming directly from your smartphone. Built to withstand the rigorous demands of Canadian climates, these pumps ensure robust flow rates while drastically reducing seasonal electrical consumption.
When investing in a pool equipment replacement, the correct sizing, wiring, and integration of your circulation system dictate both its lifespan and your overall energy savings. The Hayward Variable Speed pump lineup—including the 400 (MaxFlo), 600 (Super Pump), and 800 (TriStar) series—is designed to replace outdated, energy-draining single-speed models. As a Hayward certified installer, 4Most Energy ensures that your variable speed pool pump installation Southern Ontario strictly adheres to both the manufacturer’s rigorous specifications and the Canadian Electrical Code (CEC).
Unlike purchasing from standard big-box retail outlets or hiring uncertified contractors, a professional installation by 4Most Energy guarantees long-term reliability and safety through proper hydraulic balancing and code-compliant electrical bonding. Modern Ontario building codes require specific grounding parameters for pool environments; our licensed technicians ensure your new pump is connected to a dedicated GFCI-protected branch circuit and properly bonded using the mandatory No. 6 AWG solid copper wire required for Canadian installations.
Whether you are upgrading a massive high-volume residential pool with the TriStar 800 or retrofitting a standard system with the Super Pump 600, we precisely calibrate the minimum and maximum RPMs to match your specific filtration, heating, and water feature loads. This eliminates the cavitation and premature motor wear often caused by improper pipe sizing or excessive system pressure.
Manufacturer Warranty Highlight: Up to 3 years on parts and labor when professionally supplied and installed by a certified Hayward contractor.
OmniX Mobile App Integration: Built-in Bluetooth connectivity allows you to control pump speeds, configure priming durations, and set customized daily schedules directly from your mobile device.
High-Efficiency TEFC Motor: The Totally Enclosed Fan-Cooled design prevents moisture and debris from entering the motor windings, maximizing longevity in harsh outdoor environments.
Integrated Freeze Protection: Built-in temperature sensors automatically activate the pump to circulate water when ambient temperatures drop near freezing, protecting the plumbing infrastructure.
| Specification | MaxFlo VS (400 Series) | Super Pump VS (600 Series) | TriStar VS (800 Series) |
|---|---|---|---|
| Model Numbers | VSP23415, VSP23420 | VSP26615, VSP26620 | VSP32810, VSP32815, VSP32820 |
| Max Flow Rate | 80 GPM (2") | 110 GPM (2.5") | 160 GPM (3") |
| Voltage | 115 / 230V | 115 / 230V | 230V Only |
| Motor Type | Variable Speed TEFC | Variable Speed TEFC | Variable Speed TEFC |
| Plumbing | 1.5" / 2" | 1.5" / 2" | 2" / 2.5" |
| Control | OmniX App / Manual | OmniX App / Manual | OmniX App / Manual |
Selecting the correct pump requires matching the pump's flow capabilities with your pool's total dynamic head (TDH) and pipe diameter. For cold Southern Ontario climates, efficient turnover rates are critical to maximizing the performance of your heating system. Upgrading to variable speed pool pumps allows you to run the system at a low, energy-conserving RPM for standard filtration, while reserving high-speed capacity for vacuuming or rapid heating cycles. We strictly follow the hydraulic rule of maintaining a straight pipe length equivalent to 5x the pipe diameter leading into the suction inlet to prevent turbulence and cavitation.
(If you are also considering upgrading your home's internal heating infrastructure, explore our high-efficiency HVAC upgrades.)
Hydraulic Assessment: We evaluate your existing suction and return lines to ensure they can handle the maximum recommended system flow rate without exceeding 50 PSI.
Electrical Integration: We disconnect the existing power and verify the branch circuit is properly protected by a Ground-Fault Circuit-Interrupter (GFCI).
Plumbing & Sealing: Plastic threaded connections are sealed utilizing precise PTFE tape application to prevent air traps or suction leaks. Plumber's dope is strictly avoided as it causes plastic degradation.
Bonding: A No. 6 AWG solid copper wire is run from the external bonding lug on the pump motor to the pool's reinforcing grid to neutralize stray voltages as per the Canadian Electrical Code.
App Configuration & Calibration: The OmniX module is initialized, voltage jumpers are verified, and the minimum/maximum speed parameters are programmed to match your filter's optimal flow rate.
(Planning a complete utility overhaul? Ask our technicians about our new boiler installation services during your site assessment.)
For Hayward pool equipment (including heaters and integrated circulation systems), the tiered warranty system strictly applies:
1-year standard warranty,
2-year non-ASME pro install warranty,
and a 3-year ASME pro install warranty.
To maintain this coverage, critical water chemistry requirements must be rigorously maintained: pH must remain between 7.4-7.6, Alkalinity at 80-120 ppm, and Salt levels between 2700-5000 ppm. Warranty exclusions apply for damage resulting from freezing, improper flow, or chemical imbalance.
Toronto, Markham, Richmond Hill, Vaughan, Aurora, Newmarket, Scarborough, Brampton, and Mississauga.
Extended Service Area: Stouffville, Oshawa, Barrie, Orangeville, Hamilton, St. Catharines, Guelph, Kitchener.
The MaxFlo (400) and Super Pump (600) models can be field-configured for either 115 VAC or 230 VAC via internal jumpers, while the TriStar (800) series requires a 230 VAC supply. All models must be hardwired to a dedicated GFCI-protected branch circuit and bonded with a No. 6 AWG solid copper wire.
Yes, all of these variable speed pumps come equipped with the Hayward OmniX module. This allows for direct Bluetooth control of scheduling, priming, and speed adjustments via the OmniX Mobile App.
Yes. By reducing the motor speed during standard filtration cycles, variable speed pumps drastically decrease power consumption, often paying for themselves in energy savings within the first two to three seasons of operation.
The TriStar series is capable of generating flow rates up to 160 GPM. To utilize this power safely and efficiently without causing cavitation, your suction lines must be at least 2.5 to 3 inches in diameter. We evaluate your plumbing during the quote process to match the correct pump to your system.
Yes, these pumps include an integrated water temperature sensor and a Freeze Protect mode. When enabled, the system will automatically circulate water at a low speed if temperatures approach freezing to help prevent catastrophic pipe expansion.
Pool pumps operate under hazardous pressure and involve high-voltage electricity near water. A certified professional installation ensures that electrical grounding, GFCI protection, and hydraulic pressures comply with safety standards, which is why Hayward extends the warranty strictly for professionally installed equipment.
