Original price was: $9,990.00.$8,799.00Current price is: $8,799.00.
Starting at:
✅ Equipment only →Just add to cart.
No guesswork. Get your exact installation cost today.
The Rinnai I-Series Plus IP199S is a High-Efficiency Condensing Boiler delivering a massive 199,000 BTU of dedicated heating power. The definitive solution for large luxury homes, expansive snow-melting systems, and commercial-grade applications.
Commercial-Grade Power for Your Residential Sanctuary. When standard boilers aren't enough, the Rinnai IP199S steps in. Installed by 4Most Energy, this is the most powerful high-efficiency condensing unit in the heat-only lineup. It is engineered to handle the substantial heat loads of large estates, multi-story properties, or homes with significant glass exposure.
Despite its massive 199,000 BTU output, it retains the intelligent design of the I-Series: a self-cleaning stainless steel heat exchanger, 96% AFUE condensing efficiency, and whisper-quiet operation. Whether you are heating 5,000 sq. ft. of living space or keeping a long driveway snow-free, the IP199S delivers unwavering performance.
Warranty: Heat Exchanger: 15 Years (Residential Applications) - Parts: 5 Years - Labor: 1 Year (Standard Rinnai Coverage)
Is this the right unit for your home? The IP150S is the heavy-hitter of the residential lineup, built for properties that demand more power.
Home Sizing: Ideal for homes up to 4,500 - 5,000 sq. ft.
(depending on heat loss).
Primary Applications:
Large Scale Retrofits: The best application for homes upgrading from older, low-efficiency, or defective boilers. It is a proven, reliable replacement for aging Viessmann, NTI, Navien, Bosch, Lennox, and SlantFin units, upgrading you to high-efficiency condensing technology.
New Construction: The premium solution for new builds looking for the best possible energy efficiency ratings.
Massive Hot Water: When paired with a large Indirect Tank, this system can generate endless hot water for multi-bathroom luxury estates with spa features.
Heating Versatility: This unit acts as the central heart of your heating system:
Radiators (Rads): Compatible with large cast iron, baseboard, or panel radiators.
Important Note for Cast Iron Systems: If you are connecting to an old cast iron radiator system, specific protection devices are required to shield the new boiler from corrosion and dirt.
In-Floor Heating: Perfect for dedicated radiant floor zones (basements, bathrooms, or whole-home).
Hydronic Air Handlers: Work seamlessly with High/Low Velocity air handlers to provide forced-air heating with the comfort of hot water.
Glycol Compatible Applications: Safe for use with glycol systems, making it the perfect engine for snow melting driveways or hydronic garage heaters where freeze protection is essential.
The IP199S is a "Heat Only" boiler, giving you two distinct advantages for hot water:
Keep Your Current Tank: If you have a functioning electric or gas water heater, the IP150S handles the heating while your tank handles the water. No need to fix what isn't broken.
Upgrade to an Indirect Tank: For the ultimate luxury experience, pair the IP199S with an Indirect Tank. The boiler heats the water in the tank, providing massive storage for high-volume demands (like soaking tubs) with zero recovery lag time.
By focusing purely on heating with condensing technology, the IP150S captures waste heat to achieve 96% efficiency. It modulates down to low fire rates to maintain temperature without "short-cycling," saving you money all winter.
No more clanking pipes or roaring burners. The Rinnai I-Series runs quietly in the background, making it perfect for installation in finished basements or utility closets.
Rinnai’s exclusive stainless steel heat exchanger features a self-cleaning down-fired design that prevents mineral scale buildup, ensuring your system lasts longer and requires less maintenance.
From your first call to final start-up, 4Most Energy certified boiler experts handle everything
We install the new high-efficiency boiler on a secure plywood mounting board and connect it to the gas, venting, and hydronic system. Dual PVC vent pipes (intake and exhaust) are routed through the side wall for proper airflow. The installation also includes setting up a drain system for condensate management and installing all the necessary devices and piping to ensure safe operation. After installation, we perform a full leak test and air bleeding process to remove trapped air and verify system pressure. All connections meet Ontario safety standards, and the system is purged, pressure-tested, and fully optimized for performance.
Complete installation package with all required components.
Enhance your boiler’s efficiency, comfort, and reliability with professional upgrades by 4Most Energy.
A Heat-Only boiler (like the Rinnai I-Series Heating models) is a dedicated engine for warming your home via radiators or in-floor loops. It does not produce tap water directly.
A Combi boiler does both jobs (heating + hot water) in one box.
You should choose a Heat-Only model if:
You have a large home (over 2,500 sq. ft.).
You have high hot water demand (e.g., 3+ bathrooms, large soaking tubs, body sprays).
You prefer using a separate Indirect Hot Water Tank to ensure high-volume delivery.
Not on its own. A Heat-Only boiler is designed to pair with an Indirect Water Heater (a storage tank).
How it works: The boiler heats fluid and sends it through a coil inside the tank. This coil heats the domestic water stored in the tank rapidly.
The Benefit: This "Boiler + Tank" combo is the gold standard for large families or luxury homes with multiple body-spray showers. Because the Rinnai boiler is so powerful, it can heat the tank much faster than a standard gas or electric water heater, providing massive amounts of hot water for filling Jacuzzis or running multiple showers simultaneously without running out.
The Rinnai I-Series features a Self-Cleaning Stainless Steel Heat Exchanger.
Design: Unlike competitors that use aluminum (which can corrode) or standard stainless steel, Rinnai uses a unique down-fired ceramic burner design.
Self-Cleaning Action: By firing downwards, condensation naturally drains out of the unit, flushing away sediment and preventing mineral buildup on the heat exchanger walls. This design significantly extends the lifespan of the unit compared to traditional up-fired boilers.
The Rinnai I-Series boasts an incredibly high Turndown Ratio (up to 10:1).
What it means: A 199,000 BTU boiler can "turn down" its fire to operate at just 19,900 BTUs.
Why it matters: On mild Spring or Fall days, you don't need the boiler running at full blast. This modulation prevents "short-cycling" (turning on and off rapidly), which saves massive amounts of fuel and reduces wear and tear on the components.
Absolutely. The Rinnai I-Series is fully compatible with high-temperature systems like cast-iron radiators, but retrofitting requires expert design to protect the new unit.
Boiler Protection (Dirt Collector): Old radiators often contain decades of metallic sludge (magnetite). We install a Magnetic Dirt Collector to trap this debris before it enters the boiler, preventing damage to the sensitive heat exchanger.
System Design (Primary/Secondary Loop): An expert must design the piping using a primary/secondary loop. This ensures the correct flow rate through the boiler while maintaining the high-volume circulation required to heat heavy cast-iron radiators evenly.
Air Elimination: It is vital to install an Air Eliminator to scrub oxygen from the water. Oxygen is the primary cause of corrosion in cast-iron systems.
Outdoor Reset: Our technicians program the boiler’s "outdoor reset" curve to deliver the exact water temperature your specific radiators require to heat your home efficiently, preventing the boiler from working harder than necessary on milder days.
Yes. Rinnai Heat-Only boilers are excellent engines for high-velocity or standard hydronic air handlers (like Lifebreath, Unico, or Air Max systems). They provide the precise water temperatures needed to generate comfortable, non-drying warm air.
Yes, it is the ideal solution.
The Rinnai I-Series can be configured as a standalone heat source for radiant floor loops or combined with an Indirect Tank for massive hot water demand.
Built-in Zone Controller: Rinnai features a built-in zone controller capable of managing up to 3 zones directly without needing complex external controls.
Slab Protection: The unit offers precise temperature adjustment controls designed specifically to prevent concrete slab cracking (thermal shock).
Glycol Compatible: The system works perfectly with Glycol (antifreeze) loops, making it ideal for garage heating or snow-melt applications.
For Custom Homes: We often install the IP150S model to handle multiple heating zones (e.g., basement slab + main floor radiators) while simultaneously powering a high-capacity indirect tank for 3+ luxury bathrooms.
Absolutely. Rinnai Heat-Only boilers use Condensing Technology to eliminate the waste associated with old chimney-vented systems.
Stop Heating the Outdoors: Old, low-efficiency boilers lose a massive amount of heat directly up the chimney—literally sending your money into the sky. The Rinnai captures this heat, achieving up to 96% AFUE.
No Standby Loss: Unlike old cast-iron boilers that stay hot all the time (wasting energy even when you don't need heat), the Rinnai unit only fires when your home calls for heat or your indirect tank needs recharging.
Yes. For high-demand applications like motels, apartment buildings, or large driveway snow-melt systems (Glycol), we use a Cascade System.
The Solution: Instead of one massive 600k BTU boiler, we install three Rinnai IP199S (200-Series) units linked together.
Reliability & Redundancy: If one unit needs service, the others keep running—you never lose heat.
Huge Gas Savings: A single 600k boiler burns massive fuel even on mild days. A Rinnai Cascade fires only one small unit (199k) on mild days and ramps up the others only when needed, cutting gas bills significantly.
Glycol Compatible: These units are fully approved for use with Glycol systems for freeze protection in snow-melt or garage heating applications.
Get a free consultation with the 4Most Energy Boiler team for commercial high-efficiency solutions and ask for references in Toronto and Southern Ontario.
Our quote is customized based on your current situation or specific new application needs to ensure system optimization. For customers in Toronto, Southern Ontario, and surrounding areas, our comprehensive proposal covers everything required to run the boiler reliably:
Core Installation: Removal/disposal of the old unit and professional installation of the Rinnai boiler with S636 venting.
Essential Hydronic Components: Installation of all critical devices needed to run the boiler, such as the Recirculation Pump, Expansion Tank, Feeder, and Isolation Valves.
System Protection: Inclusion of Air Eliminators or Dirt Collectors to protect the new heat exchanger, plus a full system flush.
Advanced Piping (As Needed): Setup of a Primary/Secondary Loop, and Zone/Pump Controllers depending on your specific application.
Safety & Setup: Post-install gas/CO safety checks, followed by expert programming and balancing.
We follow a strict, safety-first protocol to ensure a smooth upgrade for your home. Here is our step-by-step process:
Site Preparation & Safety: We park safely to avoid blocking your neighbors. Inside, we cover floors and steps with protective runners and organize the boiler room to create a safe workspace for gas and plumbing work.
Removal & Disposal: We carefully drain and disconnect your old unit to prevent any water damage. We then remove it and transport it to a proper dump station—we never leave old equipment on your driveway or curb.
Mounting & Rough-In: We build a sturdy plywood platform on the wall to securely mount the new boiler and support all piping and devices. We use only high-quality fittings and piping.
Safety Precautions: If soldering is required, we temporarily cover smoke detectors to prevent false alarms and take full fire-safety precautions.
Gas & Wiring: We connect the gas lines and perform a preliminary pressure test to ensure no leaks. We then connect all thermostats, zone controllers, and pumps.
Venting (Critical Step): We install System 636 PVC venting with the correct slope to ensure condensation drains back to the unit. We use heavy-duty core bits to drill through your exterior wall, ensuring no damage to bricks or wooden structures.
Commissioning & Testing:
Leak Checks: We fill the system and check for water leaks.
Gas Calibration: We run the boiler for at least one hour, calibrating gas pressure and performing a carbon monoxide (CO) safety analysis.
Joint Inspection: We inspect all joints under heat stress to ensure they don't crack or leak.
Drainage: We verify the high-efficiency condensation drains properly to the floor drain or pump.
Tagging & Handover: Once the system passes all tests, our Gas Technician tags the pipe. We then walk you through the new system, showing you how to adjust temperatures and perform basic maintenance.
Post-Install Support: It is possible for minor adjustments to be needed after a fresh install. As a reputable contractor, we stand behind our work—if you see a leak or issue, we fix it fast (same day or next morning). Finally, we register your unit to officially start your warranty.
Most residential replacements are completed in one day (approx. 6–8 hours). Our team arrives in the morning with all necessary parts and aims to have your heat running by the evening.
The final cost depends entirely on the boiler size, required hydronic items, and heating application. Upgrading from a low-efficiency or older unit is complex; it often requires upgrading plumbing using high-grade materials like copper, stainless steel piping, oxygen-barrier PEX, and premium fittings.
Starting Price: A professional installation by a Master Technician using high-quality materials starts at $2,000 (labor & material). This price increases as the boiler system becomes more complex (e.g., adding zoning or indirect tanks).
The "Cheap Quote" Warning: It is critical to avoid contractors offering suspiciously low prices. A boiler installed incorrectly often doesn't show symptoms right away but can suffer critical damage in less than 4 years. Furthermore, improper installation voids the manufacturer's warranty. Boiler installation requires a specialized Hydronic Expert, not just a general gas technician or plumber.
When installed by a licensed professional like 4Most Energy, the Rinnai I-Series typically comes with industry-leading coverage:
Heat Exchanger: 12 Years
Parts: 5 Years
Labour: 1 Year (Standard)
Extended Labor Warranty Option: You can extend your labor warranty coverage up to 10 years. Ask the 4Most Energy sales department for details on our protection packages.
Understanding Your Coverage:
What "Labor Warranty" Means: If a part covered by the manufacturer's warranty fails, you do not pay for the labor to replace it.
After Warranty Expires: Once the labor warranty period ends, you are responsible for paying the service call fee and the labor cost for replacing any parts.
4Most Energy - Authorized Warranty Support: As an Authorized Rinnai Service Provider, 4Most Energy handles the entire warranty process for our clients. If a defect arises, we can directly claim, supply the parts, and replace the defective items, ensuring a seamless and hassle-free experience for you.
Yes, absolutely. We stand behind our craftsmanship.
The 4Most Energy Installation Guarantee: Beyond the boiler unit itself, 4Most Energy covers installation-related issues for one year after installation. This includes:
Drain line issues
Support and mounting stability
Wiring connections
System calibration
Plumbing connections
We ensure the system is set up perfectly so you don't have to worry about the "small stuff" causing big headaches.
Annual maintenance is strictly recommended to ensure you have smooth heating and hot water during cold weather. It is essential to improve performance, reduce the risk of gas or water leaks, and increase the lifespan of your unit.
Our expert service includes:
Descaling/Flushing: Circulating a solution to remove internal mineral buildup.
Filter Cleaning: Cleaning the air intake filter and the domestic cold water inlet filter.
Ignition Check: Inspecting and cleaning the spark igniter and flame rod.
Safety Check: Verifying there are no gas or exhaust leaks to ensure your family's safety.
Combustion Analysis: Measuring CO and CO2 levels to ensure the unit is burning fuel safely and efficiently.
Some areas of Ontario have moderately hard water.
The Risk: Without regular flushing, calcium and magnesium minerals precipitate out of the water and stick to the inside of the heat exchanger (scale).
The Damage: This scale acts as an insulator, trapping heat in the metal. This causes "thermal stress," leading to premature cracks and leaks in the heat exchanger—damage that is not covered by warranty.
Yes, it can. Warranty coverage is contingent on proper care and use of the unit. Your warranty may be voided due to:
Poor Maintenance: Failures caused by scale buildup or poor water quality are strictly not covered.
Unauthorized Installation: Units must be installed by a licensed professional. DIY or unauthorized installations often void warranty terms.
Improper Usage/Application: Using residential equipment for commercial applications (e.g., in a busy restaurant or hotel) or operating the unit outside of its design specifications.
Lack of Maintenance: Failure to perform annual service can lead to premature failure that manufacturers will not cover.
Regular annual maintenance by an authorized provider is the only way to prove you have cared for the unit, protecting both your investment and your warranty coverage.
We are not just a general HVAC company; we are Authorized Rinnai Hydronic Experts serving homeowners across the Greater Toronto Area and Southern Ontario.
Fair Price & 5-Star Quality: We are not the "cheap guy" who cuts corners, nor are we an overpriced corporation. We offer fair, transparent pricing for high-quality craftsmanship, always striving to earn a 5-Star Review after every job.
Local Stock & Reliability: We stock critical Rinnai parts in our local warehouse. If your heat goes out in January, we minimize downtime from days to hours.
Direct Access to Experts: You deal directly with a Master Technician, not a commission-based salesperson. We design your system correctly from Day 1.
Warranty Guardianship: We handle your unit registration and stand as your advocate with the manufacturer.
4Most Energy customers get priority support. You speak directly to a boiler expert, not a call center. Because we stock genuine Rinnai parts locally, we can often diagnose and fix issues faster than companies that have to wait for shipments.
Yes. We are comprehensive hydronic specialists. We service, repair, and maintain all major makes and models, including:
Viessmann
Flowmax
Baxi
Navien
NTI
And many others. The Rinnai Advantage: While we are experts on all brands, for Rinnai systems specifically, we stock all parts locally. This means if you have a Rinnai boiler, we can typically solve your issue on the very first visit without waiting for parts to ship.
Yes. We offer flexible payment plans, including 3 Months No Payments/No Interest or low monthly payments for up to 24 months, helping you upgrade to high-efficiency comfort without the upfront stress.
Yes. We offer a "Supply Only" service. We provide the full kit (Boiler + Venting + Valve Kits) and offer free sizing consultation to ensure you buy the right model. We also provide technical support if you get stuck during your install.
Live Chat via WhatsApp. We offer free consultation and troubleshooting directly through WhatsApp. You can send us photos of your current setup, and a Master Technician (not a sales rep) will provide a rough estimate or technical advice instantly.
