Carrier Air Conditioner
Lennox Air Conditioner
Moov Air Conditioner
Napoleon Air Conditioner
Bladex XHeat Series Heat Pump with A-Coil – Supplied & Professionally Installed by 4Most Energy
The Bladex XHeat Series Heat Pump with A-Coil is designed as a ducted central heat pump solution for homeowners who want electric heating and cooling from one outdoor unit. The series includes multiple residential capacities, from 2 ton through 4–5 ton, allowing the system to be matched to different home sizes, heating loads, airflow requirements, and existing ductwork conditions.
Bladex lists the XHeat Series as designed for Canadian weather, with operation down to -30°C, optimal airflow delivery, quiet operation, and adaptable heating combination. The system uses R410A refrigerant and pairs an outdoor heat pump with an indoor A-coil or air handler component. Because this is an electric heat pump system, there is no gas line, chimney, or combustion venting requirement. Installation instead depends on correct electrical supply, refrigerant line routing, condensate drainage, duct airflow, coil matching, thermostat compatibility, and outdoor unit placement.
Professional sizing is critical for this product category. A heat pump that is too small may not maintain comfort during peak heating or cooling demand, while an oversized system may short-cycle, reduce humidity control, and increase wear. 4Most Energy reviews the home’s square footage, insulation, windows, duct design, airflow, electrical panel capacity, and existing HVAC equipment before recommending the correct Bladex variation.
During installation, 4Most Energy supplies the equipment, removes eligible existing equipment where included, installs the outdoor unit and indoor coil connection, completes refrigerant and electrical connections, performs pressure and leak testing, evacuates the system, verifies safe operation, and completes final commissioning. This ensures the Bladex XHeat system is installed according to the application requirements and set up for dependable performance.
Why Install the Bladex XHeat Series with 4Most Energy?
Available in 2 ton, 2.5 ton, 3 ton, 3.5 ton, and 4–5 ton central heat pump configurations.
Designed for Canadian weather, with Bladex listing operation down to -30°C.
Up to 16.8 SEER2 efficiency, depending on selected model.
Variable capacity output ranges for both cooling and heating.
Electric heat pump operation for both summer cooling and winter heating.
R410A refrigerant across listed variations.
TXV throttling for cooling and EEV throttling for heating.
Quiet outdoor operation, with listed outdoor sound levels from 61 to 63.5 dB(A) across the selected variations.
Matched indoor A-coil or air handler model listed for each outdoor unit.
Designed for ducted central HVAC applications where airflow and duct capacity are confirmed.
Central Heat Pump Specifications
| Specification | 2 Ton | 2.5 Ton | 3 Ton | 3.5 Ton | 4–5 Ton |
|---|---|---|---|---|---|
| Outdoor Model | BX30-24HPHYHA | BX30U-30HPHYHA(X) | BX30S-36HPHYHA | BX31U-36HPHYHA | BX30U-55HPHYHA |
| Indoor Model | BLC-24HWAC1 | BLCB-36B18AC | BLC-36HWAC1 | BLC-36HWAC1 | BLC-60HWAC1 |
| Product Type | Central heat pump with A-coil | Central heat pump with A-coil | Central heat pump with A-coil | Central heat pump with A-coil | Central heat pump with A-coil |
| Power Supply | 208/230V, 1Ph, 60Hz | 208/230V, 1Ph, 60Hz | 208/230V, 1Ph, 60Hz | 208/230V, 1Ph, 60Hz | 208/230V, 1Ph, 60Hz |
| Cooling Capacity | 24,000 BTU/h | 29,000 BTU/h | 36,000 BTU/h | 38,000 BTU/h | 53,000 BTU/h |
| Cooling Capacity Range | 10,000–28,400 BTU/h | 9,900–36,000 BTU/h | 11,700–40,000 BTU/h | 11,700–40,000 BTU/h | 13,400–54,000 BTU/h |
| Cooling Input | 2,247 W | 2,855 W | 3,354 W | 3,530 W | 4,849 W |
| Cooling Current | 9.43 A | 11.1 A | 14.8 A | 14.8 A | 26.80 A |
| EER2 | 10.7 | 10.0 | 10.0 | 10.0 | 8.6 |
| SEER2 | 16.8 | 15.2 | 15.2 | 15.2 | 14.5 |
| Heating Capacity | 25,000 BTU/h | 31,000 BTU/h | 36,000 BTU/h | 42,000 BTU/h | 55,000 BTU/h |
| Heating Capacity Range | 9,600–33,400 BTU/h | 9,000–34,000 BTU/h | 9,200–40,000 BTU/h | 9,200–50,000 BTU/h | 10,800–60,000 BTU/h |
| Heating Input | 2,233 W | 2,850 W | 3,600 W | 4,000 W | 5,373 W |
| Heating Current | 9.30 A | 11.0 A | 15.65 A | 15.65 A | 24.60 A |
| COP | 3.28 | 3.39 | 3.2 | 3.18 | 3.0 |
| HSPF2 Region IV | 9.5 | 8.5 | 8.5 | 10.0 | 8.6 |
| HSPF2 Region V | 7.7 | 6.6 | 6.6 | 6.6 | 7.1 |
| Fuel Type | Electric heat pump | Electric heat pump | Electric heat pump | Electric heat pump | Electric heat pump |
| Venting Type | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Refrigerant Type | R410A | R410A | R410A | R410A | R410A |
| Cooling Throttle Type | TXV | TXV | TXV | TXV | TXV |
| Heating Throttle Type | EEV | EEV | EEV | EEV | EEV |
| Minimum Circuit Ampacity | 20A | 23A | 30A | 30A | 40A |
| Outdoor Noise Level | 63.5 dB(A) | 62 dB(A) | 61 dB(A) | 61 dB(A) | 62 dB(A) |
Recommended Application & Sizing Guide
| Capacity | Model | Recommended House Size | Recommended Occupants | Recommended Application |
|---|---|---|---|---|
| 2 Ton | BX30-24HPHYHA | Typically smaller homes or compact ducted spaces; third-party listing notes 900–1,200 sq. ft. | Commonly 1–3 occupants, depending on layout and load | Smaller ducted homes, apartments, offices, or lower-load applications. |
| 2.5 Ton | BX30U-30HPHYHA(X) | Medium homes or zones requiring more output than 2 ton | Commonly 2–4 occupants, depending on load | Medium residential applications with confirmed duct airflow. |
| 3 Ton | BX30S-36HPHYHA | Larger ducted areas requiring 36,000 BTU/h cooling | Commonly 3–5 occupants, depending on layout | Larger homes or main-floor ducted systems. |
| 3.5 Ton | BX31U-36HPHYHA | Higher-load homes needing additional heating capacity | Commonly 3–6 occupants, depending on load | Applications where heating demand is higher than standard 3 ton output. |
| 4–5 Ton | BX30U-55HPHYHA | Larger homes or high-load ducted systems | Commonly 4+ occupants, depending on home design | Larger residences requiring full duct, airflow, and electrical review. |
Installation Journey
Request Installation Quote
Submit the product request, home details, and preferred installation timeline.System Sizing Consultation
4Most Energy reviews home size, insulation, ductwork, airflow, electrical capacity, and heating/cooling load.Equipment Recommendation
The technician confirms the correct Bladex capacity: 2 ton, 2.5 ton, 3 ton, 3.5 ton, or 4–5 ton.Installation Scheduling
Installation is scheduled after the quote and scope of work are approved.Removal of Existing Equipment
Existing outdoor equipment, coil, or related components are removed where included in the quote.Installation and System Connection
Outdoor unit, indoor A-coil or air handler connection, refrigerant lines, condensate drain, electrical wiring, and controls are connected.Safety Testing
Electrical checks, refrigerant pressure testing, leak checks, airflow review, and operating checks are completed.Final Commissioning
System startup, performance verification, thermostat setup, and homeowner walkthrough are completed.
Warranty & Maintenance
Manufacturer Warranty
Bladex states that its equipment is supported by a 10-year warranty on parts and compressor. The warranty page also notes after-sales support, local spare parts availability, a dedicated technical support team, and warranty registration channels.
4Most Energy Labour Warranty
4Most Energy provides labour warranty coverage based on the installation invoice and agreed scope of work. Labour coverage applies to eligible installation-related workmanship issues during the stated warranty period.
Warranty Claim Process
Contact 4Most Energy with the model, serial number, installation date, and issue description.
A service review is completed to determine whether the issue is product-related, installation-related, maintenance-related, or outside warranty scope.
Eligible manufacturer parts claims are processed through the appropriate warranty channel.
Labour coverage is applied according to the 4Most Energy installation warranty terms.
Optional Maintenance Plan
Maintenance plans starting from $12.99/month are available.
Maintenance plan benefits may include seasonal inspection, coil and filter checks, electrical review, refrigerant performance review, condensate inspection, priority service options, and documentation for long-term system care. Enrollment can be completed during installation booking or after installation.
Service Area
Greater Toronto Area (GTA) and surrounding regions
Toronto, Markham, Richmond Hill, Vaughan, Aurora, Newmarket, Scarborough, Brampton, and Mississauga.
Extended Service Area: Stouffville, Oshawa, Barrie, Orangeville, Hamilton, St. Catharines, Guelph, Kitchener.
